Benchtop Cleaners

admin Uncategorized

Renue is a polishing and restoring cream that restores the natural shine to dull, etched or lightly scratched, polished calcium based natural stone surfaces.

Tip: Apply a hard rubbing technique when rubbing the product into the etched or worn area.

Instructions for Use
Step 1: Shake well before use and ensure surface is clean, dry and free of existing surface coatings.
Step 2: Apply a small quantity (tablespoon or less) onto the etched or worn area then using a spray bottle spray 2 squirts of water directly onto the Renue.
Step 3: Buff the product into the etched or worn area using a soft cotton towel or cloth, until the slurry becomes nearly dry and clear
Step 4: Re-wet the surface with water and polish dry with absorbent paper towel
Step 5: Repeat the process if necessary until the desired result is achieved
Ideally have the area cleaned first by a professional before using Renue for the first time, to prepare the surface for effective regular cleaning.
Brilliance is a polishing cream and cleaner that adds lustre and enhances the natural beauty of sealed and polished benchtops, vanities and furniture (not high traffic areas like floors).

Tip: Test a small area first according to the instructions below to determine the desired result.
Instructions for Use
Step 1: Shake well before use and ensure surface is clean, dry and free of existing surface coatings.
Step 2: Apply a small quantity (tablespoon or less) onto the surface of the stone then using a soft cotton towel or cloth, rub in until no residue is visible.
Step 3: Buff the surface to the desired shine with a soft cotton towel or cloth or a handheld buffing machine with a cotton or lambs wool bonnet.
Step 4: Re-apply as needed or desired.
Ideally have the area cleaned first by a professional before using Brilliance for the first time, to prepare the surface for effective regular cleaning.

SP Cleaner
S-P Cleaner is an excellent neutral PH, everyday cleaner for your stone benchtops and floors. It will clean dirt and grime off the stone and leave surfaces fresh and sparkling. It will also reduce streaking which is a common concern with natural stone surfaces.

S-P Cleaner contains a small amount of the penetrating sealer used by The Marble Man. This ensures that every time the cleaner is applied, the penetrating sealer in the stone is ‘topped up’, providing added protection. S-P Cleaner may be used on a daily basis and should be used a minimum of once per week.

Instructions for Use
Benchtops
Step 1: Mix 1 part S-P Cleaner to 40 parts water in a spray bottle.
Step 2: Spray the mixed S-P Cleaner onto the benchtop (Approximately 1 spray per ½ m2). Too much product will cause streaking.
Step 3: Using a paper towel wipe the surface dry. DO NOT use scourers or wet sponges.

Floors
Step 1: Mix 100ml of S-P Cleaner in half a bucket of warm water.
Step 2: Using a damp Microfibre Mop clean the floor with the solution from the bucket. A damp rather than wet mop will leave fewer streaks.
No need to rinse this product off with water as it acts as a rinsing product. Imperfections and streaks are more noticeable on high gloss surfaces therefore benchtops and floors must be dried with a clean towel to achieve a mirror finish.
Ideally have the area cleaned first by a professional before using S-P Cleaner for the first time, to prepare the surface for effective regular cleaning.

Share this Post